eBay Classifieds » All ads » Jobs » 

1st shift in Houston

(1-24 of 42 ads)

View as:
Categories
  1. Sponsored Link 5
  2.  
  1. Residential Driver Helper

    Equal Opportunity Employer: Minority/Female/Disability/Veteran Other Possible Location: N/A Job Schedule: N/A Job Shift: 1st Shift Pay: N/A Travel: None Relocation: N/A Job Summary Rides on truck and collects refuse on designated route. Essential Duties and Responsibilities To perform this job successfully, an individual must be able to perform the essential duties satisfactorily. Other minor duties may be assigned and may vary by location. Gathers and carries containers from individual yards ...

  2. Rolloff Driver

    Equal Opportunity Employer: Minority/Female/Disability/Veteran Other Possible Location: N/A Job Schedule: N/A Job Shift: 1st Shift Pay: N/A Travel: None Relocation: N/A Job Summary Our Roll-Off drivers are responsible for the hauling of construction debris typically from large high volume construction sites. The driver is responsible for performing assigned duties on container delivery and hauling of industrial roll-off routes. This physically strenuous position involves mounting and dismounting ...

  3. Warehouse Personnel / Order Pickers Needed Asap

    Wanted Warehouse Personnel / Forklift Operators for 1st, 2nd and 3rd shift. * NO EXPERIENCE IS REQUIRED * WE CAN TRAIN YOU FOR THE POSITION REQUIREMENTS: -Ability to work in a fast-paced environment and meeting daily goals. -Attendance and punctuality are very important. JOB DESCRIPTION: -Must follow all safety rules and housekeeping standards. -Supporting other departments when needed. -Additional duties as assigned. IF YOU MEET ALL THE REQUIREMENTS ABOVE, PLEASE CALL (713) 695-4897 or (713) 695 ...

  4. Warehouse Forklift Operators (No Exp) Willing to train (Up to $19/hr)

    Warehouse Order Pickers / Forklift Operators for 1st, 2nd and 3rd shift. WE CAN TRAIN YOU FOR THE POSITION IF YOU QUALIFY!!!! Attention Forklift Operators / Order Pickers! We need Operators: Sit-down, Stand-up Reach, Clamp-truck and Cherry-picker Operators With or WITHOUT experience to fill several available job openings. Our company will train and certify. Women are encouraged to apply! Jobs available in YOUR Area; Temporary/ temp to perm and permanent positions.  CALL TODAY! *(713) 695-4820 or ...

  5. Customer Counter Associate

    Please apply to:   http://ch.tbe.taleo.net/CH12/ats/careers/requisition.jsp?org=OMNINA&cws=1&rid=744   Primary duties include support responsibilities for the customer counter such as: greeting customers, inspecting shipments and shipping documents, and other general support responsibilities. DESCRIPTION OF WORK AND/OR SPECIAL QUALIFICATIONS: Must meet driver appearance guidelines, be able to lift up to 70 lbs, be able to stand the entire shift, handle a cash register and money, assist customers, ...

  6. CNC Machinist

      Looking for 1st and 2nd shift 7+ years experience for CNC Lathes Vertical Mill Horizontal Boring Mill Needed Immediately Serious Inquiries Only Need to be able to read and understand G and M codes Ability to use ID OD Micrometers Ability to use calipers and Bore Gage

  7. Industrial Maintenance – NW Houston (Tomball Area)

    • Must have at least 5 years of current experience • Analyze test results, machine error messages, and information obtained from operators in order to diagnose equipment problems. • Clean, lubricate, and adjust parts, equipment, and machinery. Disassemble machinery and equipment to remove parts and make repairs. • Examine parts for defects such as breakage and excessive wear. • Observe and test the operation of machinery and equipment in order to diagnose malfunctions, using voltmeters and other ...

  8. QC Inspector

     Looking for a Mechanical QA/QC Inspector Experience with Baker parts or downhole parts are preferred Working with calipers, micrometers, checking threads Must have 5-10 years of experience of doing mechanical inspection on various dowhhole tools.   1st Shift Position 7am-4pm with Overtime and Saturday Work Temp to Hire

  9. Warehouse Freight Handlers (Conroe, TX)

    Full-time & Part-time Available 1st Shift / Monday - Friday Benefits available after 90 days 401(k) available after 6 months Incentive Based Pay, $10.50-$12+/hr. JOB SUMMARY: Responsible for unloading freight from various trucking companies manually or with powered equipment at assigned location at the direction of the Supervisor and/or Site Manager. Maintain proper safety procedures and operations Associate is responsible for the unloading and breaking down of freight at an adequate pace ...

  10. CNC Programmer

    1st Shift Mon-Fri - 24-29/hr plus bonus and full benefits KEY RESPONSIBILITIES Creates CNC part programs to produce a quality product within capabilities of the machine tools and associated tooling designs. Consults with Prototyping Manager to devise more efficient methods. Programming experience in EdgeCAM or MasterCAM preferred Assists in verifying accuracy of engineered drawings. Creates supporting setup and program run data for each machine program generated. Assists in maintaining the ...

  11. CNC Machinists

    CNC Machinist 1ST & 2nd Shift Immediate Hire Logik Precision – Houston, TX Looking for 1st and 2nd shift ***7+ years experience for CNC Lathes Vertical Mill Horizontal Boring Mill **Needed Immediately Serious Inquiries Only*** Need to be able to read and understand G and M codes Ability to use ID OD Micrometers Ability to use calipers and Bore Gage

  12. Electronic Assembler

    Reliant Area - Houston, TX Electronic assembly Soldering skills cable and connector knowledge Able to read prints and/or diagrams 1st shift 6 am - 2:30 pm flexible to overtime $12

  13. Industrial Maintenance Technician (amc-N)

    Opportunity for a Maintenance Tech in Conroe - 1st shift! Must have experience in running conduit, PLC and plumbing on machines. The person in this position will be required to: Read electronic schematics and assembly prints. Work on automation equipment. Troubleshoot in order to repair production equipment. Operate basic electronic test equipment. Comply with all departmental rules and safety regulations. Perform preventive maintenance on production equipment. Accept/perform other related ...

  14. Manufacturing Production

     Looking for Motivated and Hard Working.   Monday - Friday  Sat - Sun Varies Shift 1st $10.00 Shift 2nd $11.00 Job Description - Helping out Fabrication, Galvanizing, Packaging, Shipping and Receiving Departments. Please Apply  Can't Wait to Meet You!!!!        

  15. OPEN INTERVIEWS FOR FREIGHT HANDLERS

    ****JOB FAIR**** 7/15/2015 11am – 4pm Comfort Inn and Suits 7209 Garth Road. Baytown, TX, 77521 Full and Part Time available Benefits after 90 days 1st and 2nd shift Competitive Incentive based pay up to $17+ per hour Responsibilities: Inspect your assigned jack for safety issues. Operate pallet jack in a safe and efficient manner. Enter the proper information into the productivity measure. Identify the correct pick location and pick sequence in accordance to the order. Pick the correct item and ...

  16. Tractor Trailer Driver

    Equal Opportunity Employer: Minority/Female/Disability/Veteran Other Possible Location: N/A Job Schedule: N/A Job Shift: 1st Shift Pay: N/A Travel: None Relocation: N/A Job Summary Safely operates a tractor trailer to perform assigned duties on designated routes. Essential Duties and Responsibilities To perform this job successfully, an individual must be able to perform the essential duties satisfactorily. Other minor duties may be assigned and may vary by location. Operates vehicle in ...

  17. Production Assistants - 1st -2nd shift

    Farmer Brothers Company has excellent opportunities for many Production Assistants to support coffee and tea product distribution. This is an entry level position with great opportunity for advancement! This position is responsible for the general clean-up activities of the plant; in addition assisting the Production and System Operators in the manufacturing and packaging of coffee, tea, and processing department functions. This is a Union branch location.1st shift 6:00am-2:30pm 2nd shift starts at 2 ...

  18. Various Manufacturing Jobs Available $ 10.00 -$13.00 DOE/Interview

    Large Manufacturing company located in the 290/Bingle area are currently looking for various skilled workers. These are temp to hire positions and must be able to work either 1st or 2nd shift. Must be able to pass a drug screen and background check. Some criminal convictions may be considered all cases will be reviewed on a case by case basis. Must have reliable transportation job is not on a busline. To be considered for positions you MUST have a min of 1-2 yrs experience in each field along w ...

  19. Journeyman Electrician

    This East Houston/Channelview area manufacturer has a 1st shift opportunity for an electrician.  Candidate must have a Texas Journeyman Electrician License, and will be responsible for installation, maintenance, troubleshooting and repair of electrical wiring and associated fixtures and controls. This job requires knowledge and application of electrical principals, materials, National Electric Code and Safety Standards. This is a temp to hire position and the pay is $20/hour, depending on experience. ...

  20. Robotic Weld Technician

    South Houston area manufacturer has an opening for a Robotic Weld Technician to perform programming, operations, troubleshooting, and routine maintenance to various robotic welding applications.  We are seeking candidates with a great attitude and work ethic, who possess 5 years experience with robotic welding.  Forward your resume to be considered for this 1st shift, temp-to-hire position. Requirements: 5 years experience with robotic welding (OTC Daihen Robotics is preferred). Working ...

  21. Warehouse Janitor

    Maintenance/Janitor Long term temporary position on 1st shift, paying $9/hr in the Sugar Land area. Seeking a self-motivated individual to assist with janitorial duties in the warehouse. We currently have two on staff and would like to add one more to the team! Daily duties include but not limited to: Organizing empty pallets Taking trash out Forklift operating Keeping warehouse floors clear of debris Occasionally: Cleaning all restrooms in the facility Keeping break rooms clean Mopping ...

  22. Group Leader

    Responsibilities: As a Group Leader you will communicate daily requirements to Team Leaders and report to Shift Manager. When possible will solicit and use input from the Team Leader and members on various issued related to the improvement in the process. As a group leader you will set an example for behavioral expectations within the work group. This position will work in conjunction with other division Group Leaders while reporting to the Shift Leader. Job Summary: Support and facilitates ...

  23. CNC Lathe Machinist

    1st and 2nd Shift CNC Machinists $14 to $21 per hour based on exp Monday through Friday 10 to 12 hour shift 1st shift starts at 8am, 2nd shift starts at 3am Location: 45 North just south of Louetta Contact # (281) 448-5465   JOB PURPOSE The CNC Machinist programs and operates CNC lathe and mill machines to perform production machining operations where sequences, set-up methods, material and tooling are specified by process drawings, work orders and other documents in order produce high quality ...

  24. Industrial Maintenance Electrician (amc-d)

    East Houston manufacturer has an immediate need for a solid Industrial Maintenance Electrician. This is a 1st shift position which pays $18+ (depending on experience), and is an excellent temp to hire opportunity for candidates with 3+ year’s electrical and mechanical repair experience. The person in this position will assist both electrical and mechanical technicians and will be responsible for the following: Perform electrical maintenance and repairs. Perform preventive, predictive and ...