eBay Classifieds » All ads » Jobs » Construction & trades » 

2nd shift in Houston

(1-24 of 35 ads)
View as:
Categories
    1. 2nd Shift Fluxcore Welder - NW Houston

      Temp to Hire opportunity with a NW Houston (77041) Full Service Fabrication Company. This client company has an immediate need for several fluxcore welders for the 2nd shift (Hours of Operation 4:30 pm - 5:00 am, with 30 minute lunch).  You will be working Monday through ...

    2. Maintenance Tech - Northside Opportunity - CNC & PLC

      NW global player in manufacturing has an immediate opening for a highly skilled maintanence electrician to maintain production, welding, machining and computerized equipment as well as participating in general facility support.  Will be troubleshooting, installing and ...

    3. Pipe and Vessel Fitter - Far South ENDLESS WORK!!

      Bay Area machine shop that has been in business for well over 50 years is adding a skilled pipe and vessel welder / fitter to perform GTAW, FCAW, SMAW (tig, flux, stick) on all carbon, alloys, and exotics -  100% x-ray work - must produce with little to no supervision. Will ...

    4. Electricians & Apprentices $ 16.00 -$21.00 - Conroe, TX

      Electricians, Journeyman & Apprentices needed for temp/hire position located in the Conroe area (77301). Must be flexible to work either a 1st or 2nd shift to include weekends, holidays and OT as needed. Pay $ 16.00 -$22.00 DOE/Interview Please apply IN PERSON with ...

      No PartTime
      No Contract
      No Internship
      No Freelance
      No Telecommute

    5. Industrial Maintenance Technician

      Job Location TX - Houston Dust [ 6020 Esperson, Houston, TX, USA ] Position Type Full Time Education Level High School Salary Range DOE Hourly Travel %None Job Shift Any Job Description To effectively inspect, repair, replace, install, adjust, and maintain all ...

    6. CNC Machinist

      CNC Machinist – North Houston, TX area Medium-sized manufacturing company in the North Houston area is seeking experienced CNC Machinist to join their team!  The CNC Machinist is responsible for maintaining equipment by repairing, rebuilding, and fabricating parts. Major ...

    7. Manual Machinist

      Manual Machinist needed for a global valve and manifold company. 2nd shift Manual Machinist $13-$18 DOE Must be able to set-up, load, run machines Read blue prints Have own machinist tools Be able to work with close tolerences  

    8. CNC Mill Machinist

      A global valve and manifold company has a great opportunity for a 2nd shift CNC Mill Machinist. Must be able to set-up, edit and run CNC Mill, QC parts with micrometers and calipers & read drawings. Experience in the machining of small parts on Daewoo machinery with Fanuc ...

    9. Quality Inspector

      The ValvTechnologies’ Difference ValvTechnologies is the global leader in the design and manufacture of severe service, zero-leakage valves. We help customers solve flow control challenges safely and efficiently. Whether those challenges are daily process problems that need ...

    10. Industial/Commercial Sewing Machine Operator

      ~~Industrial/Commercial Sewing Machine Operator needed Northeast Houston manufacturer needs an industrial sewing machine operator • Sewing heavy duty fabric straps and slings • 2nd shift, 2:30pm – 11:00pm • English/Spanish bilingual

    11. Mechanical/Electrical Technician/amc

      NW Houston manufacturer has an opening for a Mechanical/Electrician Technician. The person in this position will be responsible for troubleshooting, maintenance, and repair of large manufacturing equipment, and will be required to tear down and rebuild clutches, gearboxes, ...

    12. Maintenance Technician- SE Houston/amc

      SE Houston manufacturer has an immediate opening for a Maintenance Technician.  The person in this position MUST be able to work the 2nd or 3rd shift. Seeking candidates with 3 years prior work related experience with CNC maintenance, and strong mechanical and electrical ...

    13. QC Inspector II

      1st Shift 7:00 am – 3:30 pm - Pay rate $21-25 DOE 2nd Shift + $1.35/hr Shift Differential  3:30 pm to Midnight - Pay rate $21-25 DOE 5-10 years exp and strong background in rubber, steel and thread manufacturing is required. Prior NC or CNC machining experience is a plus. ...

    14. NDE Technician

      2nd Shift + $1.35/hr Shift Differential  3:30 pm to Midnight - Pay rate $26-28 DOE 7+ years exp, Candidate must be currently certified to ASNT-TC-1A, Level II in LP, MT, UT, & VT.  Must be certified to AWS-CWI or higher. Performing visual inspection of welds on both semi ...

    15. Plasma Cutter/NC Burner/Industrial Machine Operator

      Temp to hire position located in the 290/Bingle area for large manufacturing company. Must have 2-3 years Industrial machine operating experience with the following skills to be considered for position. Water Jet Cutter Plasma Cutter NC/CNC Burner table or laser cutter ...

      No PartTime
      No Contract
      No Internship
      No Freelance
      No Telecommute

    16. General Laborer

       Personnel Services is now seeking General Laborers for Schulenburg's Texas largest Manufacturing Company. General Laborers must perform specific duties to help company meet production needs. Must be able to follow safety regulations and guidelines and stand 8 hours per ...

    17. Aluminum Welders Needed $ 15.00

      Temp to hire position for manufacturing company in the 290/Bingle area. MUST be FLEXIBLE to work a first/second shift 1st shift - 6am - 3:30 pm or later 2nd shift - 2pm - 11:30 pm or later Pay rate =$15.00 hour MUST HAVE THE FOLLOWING TO BE CONSIDERED: 2 years ...

      No PartTime
      No Contract
      No Internship
      No Freelance
      No Telecommute

    18. VMC Machinist - NW Houston - 2nd Shift/amc

      We have an immediate opportunity for an experienced VMC Machinist. Your machining background and experience are the keys to open the door to this position. This client company is growing its 2nd shift because of increased product to their worldwide customers. If you are an ...

    19. VTL Machinist - NW Houston - 2nd Shift/amc

      VTL Machinist needed with 5+ years of experience. If you are a VTL Machinist and want to work in an A/C shop in Northwest Houston/290 area, we have an opportunity for you. The position is available to address the increased worldwide demand for our client's valve products. ...

    20. CDL Driver

      JOB REQUIREMENTS, SKILLS AND QUALIFICATIONS: - Class A License required. - Double Trailer endorsement. - Evidence of one year of verifiable driving experience in the type of CMV the driver will be operating; or meeting entry level driver training requirements which shall ...

    21. Shop Supervisor/Production Manager D

      Production/Shop Supervisor Needed – NW Houston) International company is in need of a talented Production Manager/Shop Supervisor for their 2nd shift manufacturing operations. The company is involved in the manufacturing/assembly of industrial hoses/fluid transfer products. ...

    22. CNC Machinist

      CNC Machinist $14 to $21 per hour based on exp Mon through Friday 10 to 12 hour shift Mazak Experience Required 1st and 2nd Shift Available   JOB PURPOSE The CNC Machinist programs and operates CNC lathe and mill machines to perform production machining operations ...

    23. Manual Machinist

       Manual Machinist need in Pasadena TX, Must have Lathe experience with Mill being a huge plus. 5 years experience is preferred and tools are required along with performing set ups, edits, reading blueprints and threading. Pay will DOE and this is a 2nd shift position.

    24. Manual Machinist

       SW Houston Manuafacturer is looking for Manual Machinist. 1+year of experience is preffered. Reading blueprints is required along with holding tight tolerances. There is a 2nd and 3rd shift opening and pay will depend on experience.