eBay Classifieds » All ads » Jobs » Arch & engineering » 

mechanical design engineer in Houston

(1-24 of 84 ads)

View as:
Categories
  1. Sponsored Link 5
  2.  
  1. Process Engineer – Stabilization & Refrigeration - Brenham, TX

    STI-ECD-795-(C) Process Engineer – Stabilization & Refrigeration - Brenham, TX Location: Brenham, TX Domain: GENL-MFG Job Type: Direct   Summary: Provide Design, technical support, leadership and oversight to all commercial, operational, regulatory and maintenance activities as assigned within the companies Treating Business Unit, for Gas processing equipment including but not limited to , Amine treating, dehydration, hydrocarbon dew point control, stabilization and refrigeration systems. ...

  2. PE Lead Mechanical Engineer- Oil & Gas- Bellaire, TX

    STI-ECD-739-(C) PE Lead Mechanical Engineer- Oil & Gas- Bellaire, TX Location: Bellaire, TX Domain: Engineering Job Type: Direct   "Make sure your Skill Set, experience and justification for the job must be well demonstrated in your updated resume, Otherwise client will assume that you are not qualified for the job, even if you are. Must have US Green card or Citizenship or valid work authorization, no H1 Sponsorship"   Qualification / Experience: 8 years (min experience in mechanical ...

  3. Quality Engineer

    Hello,   My name is Domenic and I represent The Fountain Group.  We are a national staffing firm and are currently seeking a Quality Engineer position for a prominent client of ours.  This position is located in Houston, TX. Details for the positions are as follows:   Job Description:   Execute Comprehensive Product Assessment and Trending (CPAT) protocol for two (2)product families.  Review specifications for inspection and testing mechanisms and equipment. Analyzes production operations and ...

  4. Electrical Design ENGR- CAN System, Harness, Sensors- Pasadena, TX

      STI-ECD-649-(B) Electrical Design ENGR- CAN System, Harness, Sensors- Pasadena, TX Location: Pasadena, TX Domain: INS-LIFE Job Type: MATLHAND                           PRIMARY DUTIES Responsible for the design of the electric system of new vechicles including all major electric components: Controllers, Motors, CAN System, Harness, Sensors, Display, etc. Designing the electric schematic and harnesses. Specify the Hardware and Software to control the truck including all safety features ...

  5. Mechanical Drafter

    Immediate Opportunity Mechanical Drafter   Hello,   My name is Ray and I represent The Fountain Group.  We are a national staffing firm and are currently seeking a Mechanical Drafter for a prominent client of ours.  This position is located in Houston, TX.  Details for the positions are as follows:   Job Description:   Role: Under limited supervision, investigates and procures all data required to develop designs. Prepares preliminary sketches and/or schematic diagrams. Performs moderate ...

  6. Lead Mechanical Engineer- Oil & Gas, BSME- Pasadena, TX

    STI-ECD-739-(B) Lead Mechanical Engineer- Oil & Gas, BSME- Pasadena, TX   Location: Pasadena, TX Domain: Engineering Job Type: Direct   "Make sure your Skill Set, experience and justification for the job must be well demonstrated in your updated resume, Otherwise client will assume that you are not qualified for the job, even if you are. Must have US Green card or Citizenship or valid work authorization, no H1 Sponsorship"   Qualification / Experience: 8 years (min experience in ...

  7. Sr. Safety Instrumented Systems Engg-CFSE, CFSP, SIL- Pasadena, TX

    STI-ECD-735-(B) Sr. Safety Instrumented Systems Engg-CFSE, CFSP, SIL- Pasadena, TX Location: Pasadena, TX Domain: Engineering Job Type: Direct   Job Description: The Sr. Safety Instrumented Systems (SIS) Engineer will provide technical leadership in conceptual safety and control system front end loading design services including verification, and control strategy development in alignment with ISA-84/IEC61511 Standards.   Job Responsibility: Development of safety instrumented system ...

  8. Mechanical Drafter

    Hello,   My name is Heather and I represent The Fountain Group.  We are a national staffing firm and are currently seeking a Mechanical Drafter for a prominent client of ours.  This position is located Houston, TX. Details for the positions are as follows:   Job Description:   Under limited supervision, investigates and procures all data required to develop designs. Prepares preliminary sketches and/or schematic diagrams. Performs moderate to complex computer aided designs with emphasis on ...

  9. Mechanical HVAC Project Engineer

    A successful MEP Consulting firm in Houston is seeking a Mechanical Engineer with 3 - 8 years of relative experience in design of systems for Commercial, Retail, Educational, and Healthcare type projects. Responsibilities include but are not limited to: * Meets with Project Manager to discuss design scope, schedule, budget, phasing, site issues, and design review issues. * Implements system types as selected by Project Manager and provides complete construction documents that match the client and ...

  10. Quality Assurance Manager - Houston TX

    INTERESTED? No need to call, simply go to our website and submit your resume directly on there only, http://www.frontlinesourcegroup.com/ Our NW Houston, TX client is in need of a Quality Assurance Manager for a Direct Hire opportunity. Summary: This person will be part of the clients Engineered Systems Team. This business unit is looking for someone that will be able to assist them in quickly getting ISO 9000 certified. The successful candidate will work closely with senior management in updating ...

  11. Electrical Design Engineer- Mobile Machines Design - Bellaire, TX

    STI-ECD-649-(A) Electrical Design Engineer- Mobile Machines Design - Bellaire, TX Location: Bellaire, TX Domain: INS-LIFE Job Type: MATLHAND                           PRIMARY DUTIES Responsible for the design of the electric system of new vechicles including all major electric components: Controllers, Motors, CAN System, Harness, Sensors, Display, etc. Designing the electric schematic and harnesses. Specify the Hardware and Software to control the truck including all safety features and ...

  12. Sr. Safety Instrumented Systems Engg-CFSE, CFSP, SIL-Bellaire, TX

    STI-ECD-735-(A) Sr. Safety Instrumented Systems Engg-CFSE, CFSP, SIL-Bellaire, TX Location: Bellaire, TX Domain: Engineering Job Type: Direct   Job Description: The Sr. Safety Instrumented Systems (SIS) Engineer will provide technical leadership in conceptual safety and control system front end loading design services including verification, and control strategy development in alignment with ISA-84/IEC61511 Standards.   Job Responsibility: Development of safety instrumented system (SIS ...

  13. Reliability Engineer - Refining, Gas Compressor- Baytown, TX

    STI-IP-157-(A) Reliability Engineer - Refining, Gas Compressor- Baytown, TX Location: Baytown, TX Domain: Chemical   Job Responsibilities: Establish and maintain mechanical integrity and equipment reliability programs to ensure employee safety, provide environmental security and maximize the plant s availability, product quality, and cost effectiveness. Ownership of the plant s Pm/PdM activities; leadership of equipment performance tracking and repair/improvement prioritization; technical ...

  14. Mechanical Design Staff Engineer-Rotating equipment, SAP-Stafford, TX

    STI-IP-140-(A) Mechanical Design Staff Engineer-Rotating equipment, SAP-Stafford, TX Location: Stafford, TX Domain: Engineering Job Type: Direct   Must Have: BS in Mechanical Engineering and a minimum of 10 years of relevant experience in the Chemical and/or Petrochemical industry.  Familiarity with Industry Codes for stationary and rotating equipment.   Basic familiarity with engineering, purchasing, accounting and construction practices.          Job Responsibility: Mechanical ...

  15. Electrical Power Engineer- NFPA 70E, Testing - Stafford, TX

    STI-IP-131-(A) Electrical Power Engineer- NFPA 70E, Testing - Stafford, TX Location: Stafford, TX Domain: Engineering Job Type: Direct   Must Have: BS degree in Electrical Engineering and five (5+) years experience in the chemical process industry. Extensive experience in inspecting, maintaining, and specifying electrical systems and equipment.   "Make sure your Skill Set, experience and justification for the job must be well demonstrated in your updated resume, Otherwise client will ...

  16. Mechanical Design Engineer III-Rotating Equipment, SAP-Galena Park, TX

    STI-IP-125-(A) Mechanical Design Engineer III-Rotating Equipment, SAP-Galena Park, TX Location: Galena Park, TX Domain: Engineering Job Type: Direct   Must Have: BS in Mechanical Engineering 5 years of relevant experience Experience in the Chemical and/or Petrochemical industry Familiarity with Industry Codes for stationary and rotating equipment Familiarity of SAP   "Make sure your Skill Set, experience and justification for the job must be well demonstrated in your updated resume, ...

  17. Lead Mechanical Engineer

    MUST BE FULLY AUTHORIZED TO WORK FOR ANY COMPANY IN THE US   Description Lead Mechanical Engineer Mechanical (Rotating/Static/Package/Piping/Material handling design) for oil & gas production/ drilling projects   Requirements Min. Bachelor degree in Mechanical Engineering At least 10 years of experience on Offshore production/drilling projects with US EPC companies. Must have full project cycle (FEED through Detailed Engineering) experience. Fluent in English, both verbal and written is a ...

  18. Mechanical Design Engineer III- Rotating Equipment- Stafford, TX

    STI-IP-125-(E) Mechanical Design Engineer III- Rotating Equipment- Stafford, TX Location: Stafford, TX Domain: Engineering Job Type: Direct   Must Have: BS in Mechanical Engineering 5 years of relevant experience Experience in the Chemical and/or Petrochemical industry Familiarity with Industry Codes for stationary and rotating equipment Familiarity of SAP   "Make sure your Skill Set, experience and justification for the job must be well demonstrated in your updated resume, Otherwise ...

  19. AutoCad Layout Designer (6 months +)

    Job Title: Technical Professional - AutoCad Layout Designer Job Description: The successful candidate should be able to prepare clear, complete, and accurate working plans and detail drawings from rough or detailed sketches or notes for engineering or manufacturing purposes, according to specified dimensions by Computer Aided Design (CAD) system. They must me able to use CAD software to provide support to Engineers by preparing routine layouts, detail drawings, assembly drawings, sketches, and ...

  20. Reliability Engineer - Refining, Petrochemical - Jacinto City, TX

    STI-IP-157-(E) Reliability Engineer - Refining, Petrochemical - Jacinto City, TX Location: Jacinto City, TX Domain: Chemical   Job Responsibilities: Establish and maintain mechanical integrity and equipment reliability programs to ensure employee safety, provide environmental security and maximize the plant s availability, product quality, and cost effectiveness. Ownership of the plant s Pm/PdM activities; leadership of equipment performance tracking and repair/improvement prioritization; ...

  21. Mechanical Engineer,  P.E. required  - $110-120K per year

    Established leader in oil and gas industry electrical/electronics manufacturing industry. Northwest Houston area.   Great Benefits, and opportunities for advancement. Mechanical Engineer, P.E required:  Pay  $110-120K per year.   Job Description : RESPONSIBILITIES:  Project-related tasks:  o    Design enclosures, line-ups and houses for  engineered products and systems o    Perform structural analysis on load-bearing components of  engineered productso    Create fabrication and assembly ...

  22. Sr. Subsea Piping Designer

    Immediate need for a Sr. Subsea Piping Designer for a client in Houston, TX.    Pay rate is negotiable. Long-term contract assignment, projected 2-years.    **Applicants must have working knowledge of SolidWorks & AutoCAD. Also, must have Subsea/Offshore background.**   Duties & Responsibilities: Leads (if assigned), participates, plans, develops, prepares, coordinates and reviews design work within the Subsea Systems/Equipment discipline work group on projects of varying sizes (small study ...

  23. Sr. Production Engineer- Petrochemical, RCFA- Missouri City, TX

    STI-NP-324-(E) Sr. Production Engineer- Petrochemical, RCFA- Missouri City, TX Location: Missouri City, TX Domain: Engineering Job Type: Direct   Must Haves: Bachelors Required Major Discipline Required: Engineering (Petroleum, Mechanical or Chemical Preferred) Minimum 20+ years’ experience in Production and/or Operations Engineering for the oil & gas industry   Job Description: The Production Engineer position is responsible for overseeing the corporate reliability programs ...

  24. Petrochemical, RCFA- Sr. Production Engineer- Stafford, TX

    STI-NP-324-(D) Petrochemical, RCFA- Sr. Production Engineer- Stafford, TX Location: Stafford, TX Domain: Engineering Job Type: Direct   Must Haves: Bachelors Required Major Discipline Required: Engineering (Petroleum, Mechanical or Chemical Preferred) Minimum 20+ years’ experience in Production and/or Operations Engineering for the oil & gas industry   Job Description: The Production Engineer position is responsible for overseeing the corporate reliability programs interacting with all ...